• Member Since: February 4th, 2019
  • Location: Los angeles
  • Website: https://www.clockparts.com/high-torque-motor
  • Find me on:


When High Torque Movement Clock Hands are Essential

High torque movement clock hands are, put simply, those that are also heavy and/or too long for an ordinary motor to revolve sufficiently. Normally, (min) clock hands requiring a high torque movement are longer than 5 inches. The measurement is conventionally made from the center of the installing hole to the pointer.

However high torque clock movement min hands are available from distributors as long as 18 inches. This implies that the size of the corresponding dial is over 3 feet across. Since’s a big wall clock!

There are, certainly, many, several clocks less than 1 foot in diameter. Without a doubt, there are a lot of that the majority of minute hands are well under 6 inches in size. Therefore, the 5-inch limitation for minute hands that can be turned making use of average movements is not a serious detriment for most clockmakers.

A higher torque need calls for more power, draining pipes the battery faster. It is consequently a layout consideration for the producer to offer the minimum quantity of torque that suffices for most instances. Normally, hands made of different products vary somewhat in their weights, however the five-inch limit acts as a hassle-free benchmark tipping factor.

Currently, the main objective of clock hands is to report the moment, with creative as well as stylistic declarations taking a rear. Nevertheless, design can be made use of tastefully to bring in the eye, facilitating the focus of attention on the function of informing time. So design choices most definitely have a place.

Additionally, you want all the parts to interact sympathetically. The hands and numerals need to contrast well versus the dial background, and also these aspects need to match one another instead of fight. So as soon as you have determined that you require a high torque movement for the big hands you intend to make use of, take some treatment in picking both hand and also dial designs that best understand your vision.

You do not need to make use of a the same style for the dial as well as hands, but for finest results both styles need to work. A simple means to obtain enough contrast is to use contrasting shades for the dial history as well as the hands. Think about utilizing a differently colored second hand to prevent confusing it with the minute hand.

Clock hands for high torque movements been available in a number of various sizes, yet there are normally just a handful of varying shapes. You’ll discover a straightforward taper, a thin bar, ones with arrowheads (with or without a counteracting ruby on the other side of the placing hole), spear, gothic, and also serpentine. The most typical shade choice is black, yet you will additionally find gold, silver, white, and vintage.

While we’re on the subject we ought to review pendulums for your high torque movement. The movement provides a pendulum add-on that oscillates to and fro, and also thus there are torque considerations here too. You may or may not wish to make use of a pendulum, yet if you do there is apt to be a weight restriction that, if gone beyond, will prevent the accessory from oscillating.

This limit fits to be about 3 or 4 ounces. Bear this in mind if you are providing your own pendulum. But if you go get it from the parts vendor, simply ensure to get a pendulum made to choose the high torque movement you select.

It’s enjoyable to construct your own clocks, particularly if you have the adaptability to make them whatever size and also style you want. The majority of the moment a conventional electric motor will be sufficient to drive the hands, and also you might be able to obtain all the parts needed combined into a set. But if the watch is a foot in diameter or bigger you will need a beefier electric motor, and then high torque movement clock hands are necessary.